Rogers 4350b PCB Board

2023-01-04 11:19:02 Rogers PCB 76 Viewed

SummaryRogers PCB Board RO4350b Introduction Rogers PCB board RO4350b is a patented braided glass cloth reinforced hydrocarbon resin system, ceramic filler material. Rogers PCB board RO4350b electrical properties are very close to PTFE, braided glass cloth material Rogers PCB board RO4350b mentality is simi...

Rogers 4350b PCB Board

Rogers 4350b PCB Board is a patented braided glass cloth reinforced hydrocarbon resin system, ceramic filler material. Rogers 4350b PCB Board electrical properties are very close to PTFE, braided glass cloth material Rogers 4350b PCB Board mentality is similar to epoxy resin, glass cloth material.

Rogers 4350b PCB Board is manufactured using standard epoxy resin and glass fabric processes while providing tightly controlled dielectric constants and losses. Rogers 4350b PCB Board is a fraction of the cost of conventional microwave materials, and does not even require the special through-hole plating procedures required for microwave materials based on microwave RF board PTFE.

Rogers 4350b PCB Board passes the UL94V-0 fire rating required for active equipment and high voltage microwave RF panel design.

Rogers 4350b PCB Board Advantages

Rogers 4350b PCB Board is a hydrocarbon, ceramic laminate, dielectric constant 3.48 material that meets the requirements of the Rogers 4350b PCB Board manufacturer for printed circuit boards. Rogers 4350b PCB Board has the following advantages:

  1. 1. Rogers 4350b PCB Board has the advantage of low RF loss.

  2. 2. The low dielectric constant of Rogers 4350b PCB fluctuates with temperature.

  3. 3. Rogers 4350b PCB has low Z axis thermal expansion coefficient.

  4. 4. Rogers 4350b PCB has low coefficient of in-board expansion.

  5. 5. Rogers 4350b PCB has low dielectric constant tolerance.

  6. 6. Rogers 4350b PCB produces stable electrical characteristics at different frequencies.
    7. Rogers 4350b PCB with easy mass production and FR4 multi-layer mixed pressure, cost-effective.

Rogers 4350b PCB Specification

Rogers PCB board RO4350 materials are glass fiber reinforced (non-PTFE) hydrocarbon, ceramic laminates designed for high volume, high performance commercial applications. Rogers PCB board RO4350b material thickness: 4mil, 6mil, 10mil, 13.3mil, 16.6mil, 20mil, 30mil, 60mil, etc.

Rogers PCB Manufacturer Selected

The standardization of the Rogers PCB manufacturer for integrated circuits has been recognized by many industries. The purchaser should pay attention to the following matters when selecting rogers PCB material.

  1. 1. Pay attention to whether the surface treatment of the Rogers PCB manufacturer is standard.

  2. 2. Pay attention to whether the Rogers PCB manufacturer uses high-frequency technology.

  3. 3. Pay attention to whether the Rogers PCB manufacturer has sufficient plate thickness and model specifications.

Rogers PCB prototype Precautions

The Rogers PCB prototype uses high frequency material with dielectric constant ranging from 2.2-10.6, fire rating and mechanical strength. The points to note of Rogers PCB prototype manufacturer are :

  1. 1. Carefully check the Rogers PCB prototype file to avoid data problems.

  2. 2. Conducted comprehensive process approval of Rogers PCB prototype and process configuration with the factory line.

  3. 3. Controlled the quantity of Rogers PCB prototypes to reduce cost and take care of quality.

  4. 4. Communicated with customers of Rogers PCB prototype on matters of attention to prevent accidents in advance.


Tags:

Get Rogers 4350b PCB Board

Previous:Rogers PCB Fabrication In China

Next:没有了!

Rogers PCB Description

Rogers PCB is a high-frequency board, and the raw materials of Rogers PCB are produced by Rogers. Rogers PCB is different from traditional FR4 PCB board, Rogers PCB uses ceramic base as high frequency material. Rogers PCB has superior dielectric constant and temperature stability.rogers pcb products include rogers 4003 pcb, rogers 4350 pcb, rogers 4350b pcb, rogers 5880 pcb, rogers ceramic pcb, mixed fr-4 + rogers pcb, rogers fr4 pcb, ro4003c rogers pcb, rogers 3000 pcb, rogers 3003 pcb, rogers 5g pcb etc.

Best Rogers PCB Manufacturer - Huihe PCB

Huihe PCB is a professional Rogers PCB manufacturer in China, with many years of experience in mass production of Rogers PCB. We provide rogers pcb board, rogers pcb material, rogers pcb prototype, rogers pcb fabrication, etc. Looking for Chinese rogers pcb suppliers, Confluence is your best rogers pcb manufacturer partner.

what is rogers pcb material characteristics

Rogers PCB material is a hard and dense material, Rogers PCB material also has excellent dielectric integrity, high accuracy of Rogers PCB material thickness, Rogers PCB has excellent electrical and thermal stability.

Rogers PCB Tags

Huihe PCB Site Information

  • Article Statistics152 Articles
  • huihe weixin